Vermont-casting VCS501 Manuel d'utilisateur télécharger pdf (Page 11)

30005436

VCS501 Series Assembly

CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov-

ing the grill is recommended.

Step 9: Attach Side Burner Assembly

Follow Side Burner Assembly Instructions to assemble side burner to unit.

Step 10: Install the Ignitor Battery

NOTE: VCS501 Series require one (1) “AA” bat-

tery.

Figure 11

Unscrew the ignition button from the console and

insert the appropriate battery into the housing by

placing the positive side of the battery rst. Then

screw the ignition button back into the console.

Check for sparks under each main burner before

proceeding.

B352

Install battery

11/10

Figure 11

B35

Step 11: Install the Backlighting Batteries

NOTE: Eight (8) “AA” batteries are required. (Not included)

Figures 12

Remove the battery case from the battery holder. Insert the eight (8) “AA” batteries.

Attach battery case to back light wire connection. Reinstall battery case in battery

holder with back light connector on the top.

WARNING: Replacing the battery incorrectly might result in an explosion. Replace

the battery only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to your local envi-

ronmental guidelines.

B353

battery case

Battery

Case

B353

Figure 12

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Vermont-casting VCS501 Manuel d'utilisateur Page 11