Vermont-casting P Manuel d'utilisateur télécharger pdf (Page 3)

20007967

The Logsets have been designed and tested to oper-

ate safely when installed according to the installation

instructions contained in this manual. Read all instruc-

tions before starting the installation.

• For outdoor use only.

• The logset should be inspected before use and at

least annually thereafter. More frequent cleaning may

be necessary because of excessive lint from carpeting

or bedding material.

• In the United States, the installation and operation

must conform to local codes or, in the absence of local

codes, with the National Fuel Gas Code, ANSI Z223.1/

NFPA 54, latest edition, CSA B149.1 Installation Code,

and with the National Electrical Code, ANSI/NFPA70

(latest edition).

• The gas logset and its individual shutoff valve must be

disconnected from the gas supply piping system during

any pressure testing of that system at test pressures in

excess of 1/2 p.s.i.g. (3.5 kPa) The gas logset must be

isolated from the gas supply piping system by closing

its individual manual shutoff valve during any pressure

testing of the gas supply piping system at test pres-

sures equal to or less than 1/2 p.s.i.g. (3.5 kPa)

• Do not, under any circumstances, burn solid fuel

(wood, paper, coal) in the ﬁreplace where you have

installed your logset. Do not use it for cooking. Put

nothing on top of the logs.

• The logset must be compatible with its fuel. Natural

gas requires different hardware than propane. Never

attempt to use natural gas with a propane logset or vice

versa.

• For a propane burning logset, the supply tank must

include a high to low gas pressure regulator. The tank

must be outdoors. Do not, under any circumstances,

locate supply tanks inside any structure.

• The ﬁreplace must include a screen made of chain

mesh or a similar material. You must keep the screen

closed at all times during the operation of the logset; it

will protect you in the event of an explosion.

• WARNING: If the ﬁreplace contains glass doors,

they must remain open at all times during the opera-

tion of the logset, allowing combustion air to circulate.

• In order to avoid any possible gas leaks, apply pipe

joint compound to all non-ﬂared threaded connections

involved in this installation. For propane, the joint

compound must be resistant to the corrosive action of

propane.

• To check for leaks, always use a soapy water solu-

tion or a sniffer. Never test by using an open ﬂame.

• The area around the gas logset must be free of all

combustible materials, especially gasoline or other

highly ﬂammable, vapor producing liquids.

• Due to high temperatures, locate this logset away

from both high trafﬁc areas and furniture and draper-

ies.

• Children and adults alike should be aware of the

high surface temperatures; to avoid the risk of burns

or ignition of clothing they should stay away.

• Do not touch any part of the logset other than the

controls while it is operating or immediately after you

turn it off.

• Supervise young children and pets carefully when

they are in the area where the logset is operating.

• Do not place clothing or other ﬂammable material on

or near the logset.

•Make sure that any safety screen or guard, removed

during servicing, has been replaced before you use

the logset.

• It is imperative that you keep clear all burner areas,

control compartments and passageways for circulat-

ing air.

• Do not move the logset in any way that might dis-

lodge the logs from their ﬁxed positions. If you bump

the logset check to see if you have dislodged any-

thing.

• Provide adequate clearances around air openings

into the combustion chamber and adequate acces-

sibility clearance for servicing and proper operation.

NEVER obstruct the front opening of the ﬁreplace.

General Information

In order to assure a safe and effective instal-

lation, only a qualiﬁed service person who is

familiar with the building codes and installation

techniques appropriate to your area may install

and service this appliance.

1 2 3 4 5 6 7 8 ... 11 12

Commentaires sur ces manuels

Pas de commentaire

Vermont-casting P Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Four Vermont-casting P